HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

Informational and error messages232
Switch is not managed by
HAFM.
The selected switch or
director is not managed
by the HAFM application.
Choose a different switch or
director.
The Administrator user
cannot be deleted.
The administrator user is
permanent and cannot be
deleted from the
Configure Users dialog
box.
Informational message only—no
action is required.
The Domain ID was not
accepted. The World
Wide Name and Domain
ID must be unique in the
Fabric Membership List.
You attempted to add a
detached switch to the
Fabric Membership List
through the Fabric
Binding option
(SANtegrity Binding
feature), but a switch
already exists in the
fabric with the same
domain ID.
Enter a unique domain ID for the
switch in the Add Detached Switch
dialog box.
The management server is
busy processing a request
from another Element
Manager.
The HAFM appliance is
processing a request from
another instance of an
Element Manager and
cannot perform the
requested operation.
Wait until the process completes,
then perform the operation again.
The link to the managed
product is not available.
The Ethernet connection
between the HAFM
appliance and managed
product is down or
unavailable.
Establish and verify the network
connection.
The maximum number of
aliases has already been
configured.
The maximum number of
aliases allowed was
reached.
Delete an existing alias before
adding a new alias.
The maximum number of
management server
network addresses has
already been configured.
The number of HAFM
appliance IP addressees
that can be defined to the
HAFM application has
already been configured.
Delete an existing IP address
before adding a new address.
The maximum number of
members has already
been configured.
The maximum number of
unique members is 4097.
The maximum number of
members is 8192.
Delete an existing zone member
before adding a new zone
member.
Table 29 HAFM messages (continued)
Message Description Action