HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

HA-Fabric Manager user guide 247
Element Manager error
<number>.
The Element Manager
encountered an internal
error and cannot
continue.
Contact the next level of support to
report the problem.
Element Manager
instance is currently open.
A Element Manager
window is currently open.
Informational message only.
Enterprise Fabric Mode
will be disabled if any of
the following parameters
are disabled: Insistent
Domain ID, Rerouting
Delay, Domain RSCNs.
Do you want to continue?
You attempted to disable
these parameters in the
Configure Switch
Parameters dialog box
while the switch was
online, but Enterprise
Fabric Mode (SANtegrity
Binding feature) is
enabled.
Click Yes if you want to continue,
and disable Enterprise Fabric
Mode.
Error retrieving port
information.
An error occurred at the
Element Manager while
retrieving port information
because the Ethernet link
is down or busy.
Retry the operation later. If the
condition persists, contact the next
level of support.
Error retrieving port
statistics.
An error occurred at the
Element Manager while
retrieving port statistics
because the Ethernet link
is down or busy.
Retry the operation later. If the
condition persists, contact the next
level of support.
Error stopping port
diagnostics.
An error occurred at the
Element Manager while
attempting to stop port
diagnostics from running
because the Ethernet link
is down or busy.
Retry the operation later. If the
condition persists, contact the next
level of support.
Error transferring files <
message >.
An error occurred while
transferring files from the
PC hard drive to the
Element Manager. The
message varies,
depending on the
problem.
Try the file transfer operation
again. If the problem persists,
contact the next level of support.
Table 30 Element Manager messages (continued)
Message Description Action