HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CH-TE, August 2006)

HAFM overview26
System requirements
This section describes client and server system requirements for HAFM.
HAFM appliance system requirements
The server running the HAFM application must meet the following requirements for Windows or
Solaris platforms. When setting up your HAFM appliance:
• Use the recommended configuration.
• To set up Call Home, follow the steps in ”Configuring Call Home notification” on page 117.
• To backup, follow the steps in ”HAFM appliance backup” on page 69.
NOTE: A maximum of eight clients are allowed per HAFM appliance.
NOTE: The HAFM appliance supports up to 48 HP directors or switches (managed products).
Table 3 Windows system hardware requirements for HAFM
Minimum Recommended
Processor 2.0 GHz Intel
®
Pentium
®
4
Processor
3.0 GHz, 1 MB/800 MHz FSB
Intel Pentium 4 Processor
Hardware 24/8X CD-RW/DVD Combo,
Data Only
48/32X CD-RW/DVD Combo,
Data Only
Operating system Windows 2000
®
, service pack 4 Windows 2003 Server Standard
Edition
Memory 1 GB 2 GB, DDR400 SDRAM Memory
Graphics card 16 MB 32 MB, VGA capable
Hard drive 40 GB 40 GB ATA-100 IDE (7200 rpm)
Modem 56K, v.92 data/fax modem, PCI 56K, v.92 data/fax modem, PCI
Ethernet NIC 10/100 Mbps Ethernet LAN card 10/100 Mbps Ethernet LAN card