SW V02.02.02 HP StorageWorks C-FCSWAPI SDK Bridge Agent Installation Instructions (AA-RVJ1A-TE, September 2004)

about this guide
8 HP StorageWorks C-FCSWAPI SDK Bridge Agent installation instructions
Caution: Text set off in this manner indicates that failure to follow directions
could result in damage to equipment or data.
Tip: Text in a tip provides additional help to readers by providing nonessential or
optional techniques, procedures, or shortcuts.
Note: Text set off in this manner presents commentary, sidelights, or interesting points
of information.
Equipment symbols
The following equipment symbols may be found on hardware for which this guide
pertains. They have the following meanings:
Any enclosed surface or area of the equipment marked with these
symbols indicates the presence of electrical shock hazards. Enclosed
area contains no operator serviceable parts.
WARNING: To reduce the risk of personal injury from electrical shock
hazards, do not open this enclosure.
Any RJ-45 receptacle marked with these symbols indicates a network
interface connection.
WARNING: To reduce the risk of electrical shock, fire, or damage to the
equipment, do not plug telephone or telecommunications connectors
into this receptacle.