FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRB-TE, June 2003)

Operating and Managing Products and Parts
108 Embedded Web Server User Guide
A checked box indicates beaconing is active, an empty box indicates beaconing is
not active for the port. To change the state click once inside the box. (A failed port
cannot be set to beacon.) When finished, click Activate to enable the new
configuration, or Cancel to return to the previous configuration. If your changes
are successful, a message displays stating that your changes to the configuration
have been successfully activated.
Note: For the Director 2/140, the ports are displayed through several pages in groups
of 32. To configure the port beaconing, make sure you go through each set of ports.
Figure 37: Setting individual port beaconing on or off