FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRB-TE, June 2003)

Operating and Managing Products and Parts
109Embedded Web Server User Guide
Resetting Ports
Choose Operations from the navigation panel. Choose the Port tab and the Reset
tab; the Reset tab view displays (Figure 38). Use this page to reset ports. This
action clears all statistics counters and disables port beaconing for the port. If a
product is attached to the port and is online, this operation sends a link reset to the
attached product; otherwise, this action disables port beaconing on the port. If the
port is in a failed state, such as after failing a loopback test, the reset restores the
port to an operational state and clears the service required (amber) LED. The reset
does not affect other ports in the product.
To reset a port, click once in the box for that port's row, so that a check mark
displays. When you have selected all ports to reset, click Activate. A message
displays confirming that the operation has completed.
Figure 38: Resetting ports