FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRB-TE, June 2003)

Error Messages
124 Embedded Web Server User Guide
Error 72: No Backup FRU The FRU cannot be
swapped because a
backup FRU is not
installed.
Insert a backup FRU and
resubmit the request or
consult the installation or
service manual for this
product for appropriate
action.
Error 73: Port Not
Installed
The port specified is not
installed on this product.
Consult the
installation/service
manual on installing a
port optic.
Error 74: Invalid Number
of Zones
The specified zone set
contains less than one
zone or more than the
maximum number of
zones allowed for this
product.
A zone set must contain
at least one zone to be
considered valid. Add or
remove zones accordingly
to meet specified
requirements.
Error 75: Invalid Zone Set
Size
The zone set entered
exceeds switch NVRAM
limitations.
Reduce the size of the
zone set to meet specified
requirements. This can be
a reduction in the number
of zones in the zone set, a
reduction of members in a
zone, or a reduction of
zone name lengths.
Error 76: Invalid Number
of Unique Zone Members
The zone entered contains
more than the maximum
number of zone members
allowed per zone set for
this product.
Reduce the number of
members in one or more
zones and resubmit the
command.
Error 77: Not Allowed
While Port Is Failed
The port selected is in a
failed or inactive state, or
is in need of service.
Consult the
installation/service
manual for appropriate
action.
Error 78: System Error
Light On
This unit is not able to
beacon because the
system error light is on.
You must clear the system
error light before unit
beaconing may be
enabled. Consult the
installation/service
manual for appropriate
action.
Table 9: Embedded Web Serve Messages (Continued)
Message Description Action