FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRB-TE, June 2003)

Error Messages
126 Embedded Web Server User Guide
Error 91: E_Port Type
Configured
Ports are not allowed to
be configured as E_Ports
in S/390 mode (FICON
management style in
HAFM).
Configure the port as
either an fport or gport
and resubmit the
command.
Error 92: Not Allowed
While Port Is Unblocked
The port must be blocked
to complete this request.
Block the port and
resubmit the command.
Error 93: Not Allowed
While FICON MS Is
Installed
This request cannot be
completed because
FICON Management
Server is installed.
This operation is not
supported. No action
necessary.
Error 94: Invalid Feature
Combination
The features requested
cannot be installed at the
same time on one director
or switch.
Contact your sales
representative.
Error 99: Preferred
Domain ID Cannot Be
Zero
This product cannot be
configured to have a
preferred domain ID
equal to zero (0).
Ensure that the ID is
expressed as an integer in
the range 1–31 and
resubmit.
Error 101: Command Not
Supported on This
Product
This product does not
support the requested
command.
Command not supported.
No action necessary.
Error 102: Switch Not
Operational
The request cannot be
completed because the
switch is not operational.
Consult the
installation/service
manual and contact your
service representative.
Error 115: Invalid Switch
Speed
The request cannot be
completed because the
switch is not capable of
operating at the
configured speed.
Consult the
installation/service
manual to determine the
speed capabilities of your
product.
Error 116: Switch Not
Capable of 2 Gb/sec
The request cannot be
completed because the
switch is not capable of
operating at 2 Gbps.
Consult the
installation/service
manual to determine the
speed capabilities of your
product.
Table 9: Embedded Web Serve Messages (Continued)
Message Description Action