FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRB-TE, June 2003)

25Embedded Web Server User Guide
2
Configuring the Product
This chapter describes how to configure an HP product using the EWS interface.
These procedures can be used to configure a product after installation and as
changes are needed. You can use the tabs of the Configure page to configure the
following aspects of a director or edge switch:
■ Factory Default Values on page 26
■ Configuring Ports on page 26
■ Configuring Product Identification on page 29
■ Configuring Date and Time on page 31
■ Configuring Operating Parameters on page 32
■ Configuring Fabric Parameters on page 35
■ Configuring Network Information on page 38
■ Configuring SNMP on page 40
■ Enabling or Disabling the CLI on page 42
■ Enabling or Disabling Host Control on page 43
■ Zoning Tab View on page 44
■ Configuring User Rights on page 44
■ Binding Ports to Devices on page 47
■ Configuring Open Trunking on page 49
■ Installing Feature Keys on page 52