FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRB-TE, June 2003)

Configuring the Product
52 Embedded Web Server User Guide
Installing Feature Keys
Perform this procedure to install one or more of the following optional features:
■ OSMS — The Open Systems Management Server feature allows open
systems host control of the product.
■ FICON Management Server — The FICON Management Server feature
allows host control and inband management of the director or switch through
an IBM System/390
or zSeries 900 Parallel Enterprise Server server attached
to a director or switch port. The server communicates with the switch or
director through a FICON channel.
■ Flexport — A Flexport switch is delivered at a discount with only a portion
of the switch’s ports enabled. When additional port capacity is required, the
remaining ports are enabled (in eight-port increments) through purchase of
this feature.
■ SANtegrity Binding — This feature enhances security in SANs, which is
valuable in SANs that contain a large or heterogeneous group of fabrics and
attached devices.
■ Open Trunking — This feature enhances efficiency in the use of redundant
ISLs between neighboring switches by means of load balancing. This prevents
traffic from becoming congested on an ISL.
After purchasing a feature, obtain the required feature key from the website to
which the feature documentation directs you. A feature key is an alphanumeric
string consisting of both uppercase and lowercase characters. The total number of
characters may vary depending on keys and serial number. The feature key is case
sensitive and must be entered exactly, including dashes.
Feature keys use a format similar to the following:
XxXx-XXxX-xxXX-xX.
Note: You must be logged in with Administrator-level rights to install feature keys.