FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRB-TE, June 2003)

Configuring Zones
66 Embedded Web Server User Guide
Figure 20: Configuring zones
3. To configure a zone, first add the zone name to the product configuration. The
following naming conventions apply to zones and zone sets:
■ All names must be unique and may not differ by case only. For example,
zone-1 and Zone-1 are both valid individually, but are not considered
unique.
■ The first character of a zone set name must be a letter
(A through Z or a through z).
■ A zone set name cannot contain spaces.
■ Valid characters are alphanumerics and the caret ( ^ ),
hyphen ( - ), underscore ( _ ), or dollar ( $ ) symbols.
■ A zone set name can have a maximum of 64 characters.
Note: A product can have a maximum of 1024 zones.