FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Server User Guide (AA-RTDRB-TE, June 2003)

Configuring Zones
70 Embedded Web Server User Guide
■ Enable or disable default zone — To toggle (enable or disable) the
default zone state, click Enable Default Zone or Disable Default Zone.
Depending on the toggle state, the Default Zone field changes to
Enabled or Disabled.
■ Disable zone set — To disable the active zone set and place all attached
devices in the default zone, click Disable Zone Set. A confirmation
dialog box displays. Click OK to disable the active zone set.
■ Discard changes — To discard unsaved changes made to a zone set
configuration and revert to a saved zoning configuration, click Discard
Changes. A confirmation dialog box displays. Click OK to discard the
changes.