958-000324-002, March 2005)

Figure 3 Mounting brackets, slide rails, and bar nuts

• Mounting screws:

• Ten (10) pan-head Phillips screws (#10 x 1/2) with split lock and flat washers

that secure the bracket assemblies to the vertical rack-mounting standards.

• Ten (10) pan-head Phillips screws (M4 x 10 centimeter) with split lock and

flat washers that secure the slide rails to the HAFM appliance.

• Four (4) flat-head Phillips machine screws (#8 x 7/16) that secure the

two-hole bar nuts, front brackets, and rear brackets.

• Two (2) hexagonal-nut standoffs.

Figure 4 illustrates the standoff and mounting screws.

Figure 4 Hexago n a l-Nut standoff and m o u n ting sc rews

Initial setup