958-000324-002, March 2005)

1. As shown in Figure 8, attach the left and right slide rails to the HAFM

appliance with ten (10) pan-head Phillips screws (M4 x 10 cm). Use five (5)

screws per side. Ensure the screws are securely tightened.

Figu re 8 Slide rail installation

Installing the HAFM appliance

To install the HAFM appliance in the equipment cabinet:

1. If the front bracket portions of the b racket assemblies are installed at the front

of the cab

inet (t ypical installation), install the server through the cabinet front.

2. While fully supporting the HAFM appliance, slide the HA FM appliance and

attache

d s lide rails into the mounting brackets as shown in Figure 9.

Installation