958-000324-002, March 2005)

Figure 11 HAFM appliance connections

2. If required, connect the HAFM appliance to the customer-supplied Ethernet

LAN segment or HP-supplied Ethernet hub (private LA N interface) . To connect

the HAFM appliance:

a. As shown in Figure 11, connect one end of the Ethernet patch cable

(supplied with the HA FM appliance) to the right RJ-45 adapter (LAN 2) at

the rear of the HA FM appliance.

b. Connect the remaining end of the Ethernet cable to the L AN as follows:

• If the HAFM appliance is installed on a customer-supplied LAN

segment, conne ct the cable to the LAN as directed by the customer’s

network administrator.

• If the HAFM appliance is installed on the HP-supplied E thernet hub,

connect the cab le to any available hub port.

3. As shown in Figure 11, connect the phone cord to the left RJ-11 adapter (LINE)

at the rear of the HAFM appliance and to a facility telephone connection.

Powering on the HAFM appliance

To power on the HAFM appliance:

WARNING!

Use the supplied power cords. Ensure the facility power receptacle is the correct type,

supplies the required voltage, and is properly grounded.

Installation