958-000324-002, March 2005)

Figure 18 LCD panel (Auto Get D

NS)

5. Do one of the following:

• Use the up and down arrow keys as described in step 2 to select YE S,then

press ENTER. The D NS address is auto-detected and record ed. Proceed

to step 7.

• Select NO by pressing ENTER. The following message is displayed (Fig

ure

19).

Figure 19 LCD panel (Input D N S)

6. Use the arrow keys a s described in step 2 to enter the IP address for the DNS

server, then press ENTER.Thefollowingmessageisdisplayed(Figure 20):

Figure 20 LCD panel ( Save Ch ange)

7. Use the up and down arrow keys as described in step 2 to select YES,then

press ENTER.Ifyousavedthechanges,aWait a moment!! message

is displayed at the LC D panel and the LCD panel returns to the LAN 1

Setting?? message.

8. Press the up and down arrow keys until Return?? is displayed, then press

ENTER. The LCD panel returns to scrolling mode, which continually displays

HAFM appliance operational information.

9. Record the private LAN IP address and subnet mask for reference if the HAFM

appliance hard drive fails and must be restored.

Manually configuring public LAN addresses

To configure TCP/IP network information for the priv ate LAN connection (LAN 1):

1. At the LCD panel, press ENTER. The Welcome!! or op erational information

message changes to the following (Figure 21):

Configuration