958-000324-002, March 2005)

Figure 25 LCD pa nel (Input D NS)

7. Use the arrow keys as described in step 2 to enter the IP address for the DNS

server, then press ENTER. The following message is displayed (Figure 26):

Figure 2

6LCDpanel(SaveChange)

8. Use the up and down arrow keys as described in step 2 to select YES,then

press ENTER.Ifyousavedthechanges,aWait a moment!! message

is displayed at the LC D panel and the LCD panel returns to the LAN 1

Setting?? message.

9. Press the up and down arrow keys until Return?? is displaye d, then press

ENTER. The LCD panel returns to scrolling mode, which continually displays

HAFM appliance operational information.

10. Record the private L A N IP address and subnet mask for reference if the H AFM

appliance hard drive fails and must be restored.

Configuring private L AN addresses

NOTE:

Before starting this procedure, ensure that the L AN 2 interface is physically connected

to the L AN. An LCD d isplay of 0.0.0.0 indicates a physical LAN connection is not

present.

You can configure the private LAN connection (LA N 2 ) using one of the following

methods:

• Use Dynamic Host Control Protocol (DHCP) to assign the HA FM appliance

IP address, subnet mask, and default gateway IP address. You c an either

auto-detect or manually select the DNS server IP address.

• Manually enter the HA

FM appliance IP address, subnet mask, default gateway

IP address, and DNS server IP address.

Configuration