958-000324-002, March 2005)

Figure 30 LCD pan el (Input DNS)

7. Use the arrow keys as described in step 2 to enter the IP address for the DNS

server, then press ENTER.Thefollowingmessageisdisplayed(Figure 31):

Figure 31 LCD panel (Save Change)

8. Use the up and down arrow keys as described in step 2 to select YES,then

press ENTER.Ifyousavedthechanges,aWait a moment!! message

is displayed at the LC D panel and the LCD panel returns to the LAN 1

Setting?? message.

9. Press the up and down arrow keys until Return?? is displaye d, then press

ENTER. The LCD panel returns to scrolling mode, which continually displays

HAFM appliance operational information.

10. Record the private L A N IP address and subnet mask for reference if the H AFM

appliance hard drive fails and must be restored.

Manually configuring private LA N addresses

To configure TCP/IP network information for the priv ate LAN connection (LAN 2

1. At the LCD panel, press ENTER. The Welcome!! or op erational information

message changes to the following (Figure 32):

Figure 32 LCD panel (Input Password)

2. Using the

button to increment a digit, the button to decrement a digit,

the

button to move the cursor left, and the button to move the cursor

right, input the default password (9999) , then press ENTER.TheLAN 1

Setting?? message is displayed at the LCD panel.

3. Press the

tton until the LAN 2 Setting?? message is display ed at

the LCD panel.

Configuration