958-000324-002, March 2005)

d. Click in the time field and enter the desired time, then click the adjacent

up or down arrow and select AM or PM.

e. Click Apply. Record date and time information for reference if the HAFM

appliance hard d rive fails and must be restored.

7. Click OK to close the Date/Time Properties dialog box .

8. Click close (X) at the upper right corner of the Control Pa nel window to return

to the Windows 2000 desktop.

Configuring and enabling event notification features

The HAFM appliance provides the following e

vent notification features:

• Call home via dial-out — This feature provides automatic dial-out through the

modem to a ser vice support facility to report Director or Edge Switch problems.

This functionality is provided in the shipped software.

• ProactiveServicescall-homeviaLAN—Thisfeaturereportseventsviathe

LAN to a SANworks Management appliance or other server running the HP

Proactive Services software.

HP Proactive Services software is offered at no additional charge for subsystems

covered under an on-site warranty or on-site storage ha rdware support contract. To

order P roactive Services software, contact your Hewlett-Packard customer ser vice

representative.

NOTE:

You c an choose only one of the two ca l l home options: call home via dial-out or call

home via LAN. You can use either feature, but not both.

The HAFM appliance is s hipp ed with the HAFM application installed and the call

home via dial-out feature selected by default. If you prefer to use the Proactive Services

call home via L AN feature, you must:

• Order the Proactive Ser vices software.

• Remove the HAFM application.

• Reinstall the HAFM application.

• Select the call home via L AN option during the HAFM application installation.

HP StorageWorks HA-Fabric Manager Appliance installation guide F W07.00.00/HAFM

SW 08.06.00