958-000324-002, March 2005)

Figure 58 Conﬁgure Identiﬁcation dialog box

3. Replace the default text with the following entries:

• Name—EnteranameforthisDirectororEdgeSwitchasappropriate

foryourSAN.ClickSet Name As N ickname,whichwilldisplaya

check mark in the box. This will be the name that will b e displayed with

the icon for this Director or Edge Switch in the HAFM Product View and

Fabric View is displaye d.

• Description — Enter the address of your installation.

• Location — Enter the W FM Site ID and Super Region code, as obtained

in Obtaining required information, separated by “~” (tilde) characters,

asshowninthefollowingexample

US1234567890~AA

• Contact — Enter the contact name, phone number, and company name

exactly as provided to HP in Obtaining required information, separated by

“~” (tilde) characters, as follows:

FirstName~LastName~PhoneNumber~CompanyName

For example:

Joe~Smith~5085551515~ABCCompany

4. Click Ac tivate. The Configure Identification dialog box closes and the Element

Manager window at the Hardware View for this device is still displayed.

5. On the menu bar, click Maintenance>EnableCallHomeNotiﬁcation .

6. PlaceacheckmarkintheEnableCallHomeEventNotiﬁca tion option.

7. See T esting remote notification for instructions on testing the call home feature.

Configuring proactive services call home via LAN feature

The H AFM appliance call home via L AN feature provides automatic event notification

to a suppor t center for reporting Director or Edge Switch problems. In order to report

events, this feature requires the HA FM appliance to have a valid LAN connection to a

Configuration