McDATA 4Gb SAN Switch for HP p-Class BladeSystem User Guide (AA-RW20B-TE, December 2005)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 161
PrincipalPriority The priority used in the FC-SW-2 principal switch selection algorithm. 1 is
high, 255 is low. The default is 254.
ConfigDescription Switch configuration description. The configuration description can be
up to 32 characters excluding #, semicolon (;), and comma (,). The
default is Default Config.
InteropMode Interoperability mode. Choose from the following:
• Use Standard to connect to FC-SW-2 compliant switches including
McDATA switches in Open Fabric Mode. This is the default.
• Use the McDATA Fabric Mode to connect to McDATA switches in
McDATA Fabric Mode.
Table 46 Set Config switch parameters (continued)
Parameter Description