McDATA 4Gb SAN Switch for HP p-Class BladeSystem User Guide (AA-RW20B-TE, December 2005)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 41
Opening a fabric view file
A fabric view file is one or more fabrics saved to a file. To open an existing view file, perform the following
procedure:
1. Choose one of the following:
•Select Fabric > Add Fabric
•Click Add on the tool bar.
2. Enter a fabric name (optional) and the IP address of the switch through which to manage the fabric.
3. Enter an account (login) name and password. The factory account name and password are "admin"
and "password". The password (8-20 characters) is for the switch and is stored in the switch firmware.
4. Click Add Fabric.
Rediscovering a fabric
After making changes to or deleting switches from a fabric view, it may be helpful to again view the actual
fabric configuration. The Rediscover Fabric option clears out the current fabric information being displayed,
and rediscovers all switch information. Select Fabric > Rediscover Fabric to rediscover a fabric. The
rediscover function is more comprehensive than the refresh function.
Deleting switches and links
The McDATA Web Server application does not automatically delete switches or links that have failed or
have been physically removed from the fabric. In these cases, you can delete switches and links to bring
the display up to date. If you delete a switch or a link that is still active, the McDATA Web Server
application will restore it automatically. You can also refresh the display. To delete a switch from the
topology display, perform the following procedure:
1. Select one or more switches in the topology display.
2. Select Switch > Delete.
To delete a link, perform the following procedure:
1. Select one or more links in the topology display.
2. Select Switch > Delete.