McDATA 4Gb SAN Switch for HP p-Class BladeSystem User Guide (AA-RW20B-TE, December 2005)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 55
You can select zone sets, zones, and ports in the following ways:
• Click a zone, zone set, or port icon.
• Right-click to select a zone set or zone, and open the corresponding popup menu.
• Press and hold Shift while clicking several consecutive icons.
• Press and hold Control while clicking several non-consecutive icons.
Using tool bar buttons, popup menus, or a drag-and-drop method, you can create and manage zone sets
and zones in the zoning database. Table 7 describes the zoning tool bar operations.
Use the Edit Zoning dialog to define zoning changes, and click Apply to open the Error Check dialog.
Click Error Check to check for zoning conflicts, such as empty zones or zone sets. Click Save Zoning to
implement the changes. Click Close to close the Error Check dialog. Click Close in the Edit Zoning dialog
to close the Edit Zoning dialog.
Table 7 Edit Zoning dialog tool bar buttons and icons
Tool bar button Description
Create Zone Set button—Create a new zone set
Create Zone button—Create a new zone
Add Member button—Adds selected port/device to a zone
Remove Member button—Delete the selected zone from a zone set, or
delete the selected port/device from a zone
Switch port icon—Not logged in
Switch port icon—Logged in
NL_Port (loop) device icon—Logged in to fabric
NL_Port (loop) device icon—Not logged in to fabric
N_Port device icon—Logged in to fabric
N_Port device icon—Not logged in to fabric