OS SNMP Support Manual (620-000131-620, April 2005)

2-110

E/OS SNMP Support Manual

McDATA SNMP Support

Access R

Description A unique value among all fcConnUnitPortEntrys on this connectivity

unit, between 1 and

fcConnUnitNumPorts.

FcConnUnitPortType

Type INTEGER

Product Mapping If the port is Not installed

notPresent(3)

else if the Port State is online use the operating

Port Type:

F_Port = fPort(8)

FL_Port = flPort(7)

E_Port = ePort(9)

H_Port = hubPort(4)

B_Port = ePort(9)

else use the configured

Port Type:

Gx_Port = gPort(10)

G_Port = gPort(10)

Fx_Port = flPort(7)

F_Port = fPort(8)

E_Port = ePort(9)

Access R

Description The port type refers to the protocol active on the port and can take

one of the following values:

unknown (1) cannot be determined

other (2) none of the following

notPresent (3) no port

hubPort (4) hub port

nPort (5) end port for fabric

lPort (6) end port for loop