OS SNMP Support Manual (620-000131-620, April 2005)

B-16

E/OS SNMP Support Manual

FC Management MIB

onlineConnUnit(6) }

Access read-write

Status mandatory

Description This object is used to control the addressed connUnit.

NOTE: 'Cold Start' and 'Warm Start' are as defined in MIB II and are not

meant to be a factory reset.

NOTE: Each implementation may chose not to allow any or all of these

values on a SET.

Sequence ::= { connUnitEntry 22 }

connUnitContact

Syntax DisplayString (SIZE (0..79))

Access read-write

Status mandatory

Description Contact information for this connectivity unit. Persistent across boots.

Sequence

::= { connUnitEntry 23 }

resetConnUnitColdStart the addressed unit performs a 'Cold Start'

reset.

resetConnUnitWarmStart the addressed unit performs a 'Warm

Start' reset.

offlineConnUnit the addressed unit puts itself into an

implementation dependant 'offline' state.

In general, if a unit is in an offline state, it

cannot be used to perform meaningful

Fibre Channel work.

onlineConnUnit the addressed unit puts itself into an

implementation dependant 'online' state.

In general, if a unit is in an online state, it

is capable of performing meaningful

Fibre Channel work.