OS SNMP Support Manual (620-000131-620, April 2005)

B-54

E/OS SNMP Support Manual

FC Management MIB

Description A count of the errors that have occurred on this port.

Sequence

::= { connUnitPortStatEntry 3 }

connUnitPortStatCountTxObjects

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description The number of frames/packets/IOs/etc. that have been transmitted

by this port. Note: A Fibre Channel frame starts with SOF and ends

with EOF. FC loop devices should not count frames passed through.

This value represents the sum total for all other Tx objects.

Sequence

::= { connUnitPortStatEntry 4 }

connUnitPortStatCountRxObjects

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description The number of frames/packets/IOs/etc. that have been received by

this port. Note: A Fibre Channel frame starts with SOF and ends with

EOF. FC loop devices should not count frames passed through. This

value represents the sum total for all other Rx objects.

Sequence

::= { connUnitPortStatEntry 5 }

connUnitPortStatCountTxElements

Syntax OCTET STRING (SIZE (8))

Access read-only

Status mandatory

Description The number of octets or bytes that have been transmitted by this port.

One second periodic polling of the port. This value is saved and

compared with the next polled value to compute net throughput.

Note, for Fibre Channel, ordered sets are not included in the count.

Sequence

::= { connUnitPortStatEntry 6 }