FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manual (620-000131-620, April 2005)

E
E-48
E/OS SNMP Support Manual
MIB II
Description The total number of received UDP datagrams for which there was no
application at the destination port.
Sequence
::= { udp 2 }
udpInErrors
Syntax Counter
Access read-only
Status mandatory
Description The number of received UDP datagrams that could not be delivered
for reasons other than the lack of an application at the destination
port.
Sequence
::= { udp 3 }
udpOutDatagrams
Syntax Counter
Access read-only
Status mandatory
Description The total number of UDP datagrams sent from this entity.
Sequence
::= { udp 4 }
UDP Listener table The UDP listener table contains information about this entity's UDP
end-points on which a local application is currently accepting
datagrams.
udpTable
Syntax SEQUENCE OF UdpEntry
Access not-accessible
Status mandatory
Description A table containing UDP listener information.
Sequence
::= { udp 5 }