FW 07.00.00/HAFM SW 08.06.00 McDATA E/OS SNMP Support Manual (620-000131-620, April 2005)

F
F-10
E/OS SNMP Support Manual
Fabric Element Management MIB
Sequence ::= { fcFeModuleEntry 5 }
fcFeModuleFxPortCapacity
Syntax FcFeFxPortCapacity
Access read-only
Status mandatory
Description The number of FxPort that can be contained within the module.
Within each module, the ports are uniquely numbered in the range
from 1 to fcFeModuleFxPortCapacity inclusive. However, the
numbers are not required to be contiguous.
Sequence
::= { fcFeModuleEntry 6 }
fcFeModuleName
Syntax FcNameId
Access read-only -- instead of read-write
Status mandatory
Description The Name_Identifier of the module.
Sequence
::= { fcFeModuleEntry 7 }
FxPort Configuration
Table
This table contains, one entry for each FxPort, configuration
parameters of the ports.
fcFxConfTable
Syntax SEQUENCE OF FcFxConfEntry
Access not-accessible
Status mandatory
Description A table that contains, one entry for each FxPort in the Fabric Element,
configuration and service parameters of the FxPorts."
Sequence
::= { fcFeConfig 5 }