OS SNMP Support Manual (620-000131-620, April 2005)

FCFE.MIB

F-27

Fabric Element Management MIB

Description The object identifies the associated NxPort in the attachment for

which the entry contains information.

Sequence

::= { fcFxlogiEntry 3 }

fcFxPortFcphVersionAgreed

Syntax FcphVersion

Access read-only

Status mandatory

Description The version of FC-PH that the FxPort has agreed to support from the

Fabric Login

Sequence

::= { fcFxlogiEntry 4 }

fcFxPortNxPortBbCredit

Syntax FcBbCredit

Access read-only

Status mandatory

Description The total number of buffers available for holding Class 1

connect-request, Class 2 or Class 3 frames to be transmitted to the

attached NxPort. It is for buffer- to-buffer flow control in the

direction from FxPort to NxPort. The buffer-to-buffer flow control

mechanism is indicated in the respective fcFxPortBbCreditModel.

[1](23.6.2.2)

Sequence

::= { fcFxlogiEntry 5 }

fcFxPortNxPortRxDataFieldSize

Syntax FcRxDataFieldSize

Access read-only

Status mandatory

Description The Receive Data Field Size of the attached NxPort. This is a binary

value that specifies the largest Data Field Size for an FT_1 frame that

can be received by the NxPort. The value is in number of bytes and

ranges from 128 to 2112 inclusive.

Sequence

::= { fcFxlogiEntry 6 }