FW 07.01.02/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager Release Notes (AA-RUR6G-TE, August 2005)

Port Fencing dialog box may not reﬂectcorrectcountofAffectedPortsinISL

Thresholds table

This usually occur

s when a policy has been applied to an entire switch and there are

already ports with a threshold p olicy applied, even when it is selected not to replace the

existing po licy on the switch ports.

User-deﬁned nicknames for node devices do not show in Connection Properties

If you select Show Route between two node devices with user-deﬁned Nicknames, the

Nicknames for these nodes do not display in the Connection Proper ties when you

double-click the route.

Port WWN is liste

dintheNodeWWNﬁeld of Properties dialog box of a

node device

When you right click on a node device in the Product List, and select Properties from the

popup menu, the Properties dialog displays the Port WWN in the Node WWN ﬁeld

Error message window may display after you close the HAFM application

An error message stating “Op eration failed" may d isplay after exiting an HAFM

application which manages a large number of devices. This message is incorrect and

should be ignored.

Modem-based Call Home Conﬁguration icon still appears after LAN-based

Call H ome is installed

TheCallHomeConﬁguration icon that is used when the mod em -based call home has

been select

ed during HAFM installation, still appears when the LAN-based call home

has been se

lected during HAFM installation. The Call Home Conﬁguration icon also

appears in the Windows Start menu:

Start > Programs > HP StorageWorks ha -fabric m anager 8.6 > Call Hom e Conﬁguration

Double cli

cking this icon or selecting this via the Windows Start menu when LAN-based

call home h

as been selected produces the following error message: Unable to

access Call Home phone book - Please contact your service

representative. This has no impact on the functionality of the LAN based call

home. Fol

lowing the installation instructions for LAN based Call Home enables this

functio

n. There is no need to contact a service representative.

Workaround

If you installed the LAN based Call-Home feature, do not use the icon for Call Home

Conﬁguration or the Call Home Conﬁguration icon that appears in the Windows Start

menu.

HA-Fabric Manager release notes