McDATA 4Gb SAN Switch for HP p-Class BladeSystem User Guide (AA-RW20B-TE, December 2005)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 133
The following is an example of the Group Edit command:
McDATA4GbSAN (admin-security) #> group edit G1 10:00:00:c0:dd:00:90:a3
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end of
the list press 'q' or 'Q' and the ENTER key to do so.
Group Name g1
Group Type ISL
Group Member 10:00:00:c0:dd:00:90:a3
Authentication (None / Chap) [None] chap
PrimaryHash (MD5 / SHA-1) [MD5 ] sha-1
PrimarySecret (40 hex or 20 ASCII char value) [ ] 1234567890123456789
SecondaryHash (MD5 / SHA-1 / None) [None] md5
SecondarySecret (32 hex or 16 ASCII char value) [ ] 1234567890123456
Binding (domain ID 97-127, 0=None) [3 ]
Finished configuring attributes.
To discard this configuration use the security cancel command.
The following is an example of the Group List command:
McDATA4GbSAN #> group list
Group SecuritySet
----- -----------
group1 (ISL)
alpha
group2 (Port)
alpha
The following is an example of the Group Members command:
McDATA4GbSAN #> group members group1
Current list of members for Group: group1
----------------------------------
10:00:00:c0:dd:00:71:ed
10:00:00:c0:dd:00:72:45
10:00:00:c0:dd:00:90:ef
10:00:00:c0:dd:00:b8:b7
See also Security command, page 151
Securityset command, page 154
Set Config command, page 158.