McDATA 4Gb SAN Switch for HP p-Class BladeSystem User Guide (AA-RW20B-TE, December 2005)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 135
Help command
Description Displays a brief description of the specified command, its operands, and usage.
Authority None
Syntax
help [command] [operand]
Operands
[command]
Displays a summary of the command given by [command] and its operands. If you omit
[command], the system displays all available commands.
[operand]
Displays a summary of the operand given by [operand] belonging to the command given by
[command]. If you omit [operand], the system displays the available operands for the specified
command.
all
Displays a list of all available commands (including command variations).
Examples The following is an example of the Help Config command:
McDATA4GbSAN #> help config
config CONFIG_OPTIONS
The config command operates on configurations.
Usage: config { activate | backup | cancel | copy | delete |
edit | list | restore | save }
The following is an example of the Help Config Edit command:
McDATA4GbSAN #> help config edit
config edit [CONFIG_NAME]
This command initiates a configuration session and places the current session
into config edit mode.
If CONFIG_NAME is given and it exists, it gets edited; otherwise, it gets
created. If it is not given, the currently active configuration is edited.
Admin mode is required for this command.
Usage: config edit [CONFIG_NAME]