McDATA 4Gb SAN Switch for HP p-Class BladeSystem User Guide (AA-RW20B-TE, December 2005)

48 Managing fabrics
Devices data window
The Devices data window displays information about devices (hosts and storage targets) connected to the
switch. Click the Devices data window tab, in either the topology or faceplate display, to display device
information for all devices that are logged into the selected fabric. To narrow the display to devices that are
logged into specific switches, select one or more switches in the fabric tree or the topology display. Table 6
describes the entries in the Devices data window. See ”Exporting device information to a file” on page 50
for exporting device information.
Table 6 Devices data window entries
Entry Description
Port WWN Port World Wide Name
Nickname Device port nickname. To create a new nickname or edit an
existing nickname, double-click the cell and enter a nickname in
the Edit Nickname dialog. See ”Managing device port
nicknames” on page 50 for more information.
Details Click (i) to display additional detail about the device. See
”Displaying detailed device information” on page 50.
FC Address Fibre Channel address
Switch Switch name
Port Switch port number
Target/Initiator Device type: target or initiator
Vendor Host bus adapter/device vendor
Host Name Name of host. This only applies to HBAs that support FDMI and
register this data.
Active Zones The active zone to which the device belongs
Row # Row number reference for each listing in the Devices data
window table