HAFM SW 08.08.00 HP StorageWorks HA-Fabric Manager Transition Guide (AA-RV1MD-TE, January 2006)

HA-Fabric Manager transition guide 19
Logs
HAFM audit, event, session, product status, and fabric log files are migrated to the same logs in
HAFM 8.x. As a safeguard, you should export and archive these logs before migrating to
HAFM 8.x.
Product Manager audit, event, hardware, link incident, and threshold alerts are migrated.
Nicknames
Nicknames configured through the Configure Nicknames dialog box in HAFM are migrated.
Sessions configuration
Information from the Configure Sessions dialog box is migrated. This includes:
• Network addresses of computers allowed or prohibited from remote sessions
• Maximum number of remote sessions allowed
SNMP configuration
All data from the SNMP configuration is migrated. This includes the enable/disable flag and 12
rows of trap information that are configured in the HAFM Configure SNMP dialog box.
Switch identification
All switches and directors identified in the HAFM 6.x or 7.x Products View are migrated into HAFM
discovery and are placed in the Selected Individual Addresses table of the Discover Setup dialog
box. These switches are managed by HAFM 8.x. Note that if an address did not completely
migrate, you can enter the IP address of the switch or director in that dialog box.
Threshold alert configurations
Data input through the Configure Threshold Alert wizard in the Product Manager is migrated.
Zoning configurations
Zones and zone sets are migrated to the default zoning library.
Data not migrated
The following types of information are not migrated from HAFM 7.x to 8.x:
• Configurations for optional HAFM features, such as Open Trunking, SANtegrity Binding,
Enterprise Management Mode, Persistent Fabrics, and FlexPort. You must obtain feature keys for
these optional features to enable them.
• Except for the firmware library, FAF files, and logs, other Product Manager data is not migrated
since it is stored in switch memory for access by the Element Manager.
• Files created using the Backup and Restore Configuration option in the Product Manager
(NVRAM backup).
• Performance data from the Performance view in the Product Manager.
• Configuration information for switches that are not being managed locally is not included in the
migration.