FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

2
2-30
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Installation Tasks
Task 8: Configure Management Server Information
Configure the computer name and workgroup name for the
management server. Configure these parameters from the server’s
Windows 2000 operating system, using a LAN-attached PC with
standard web browser.
If required, change the management server’s gateway addresses and
domain name system (DNS) server IP addresses to conform to the
customer’s LAN addressing scheme. The gateway addresses are the
addresses of the local router for the corporate intranet.
Access the
Management
Server Desktop
To login and access the management server desktop:
1. Ensure the management server and a browser-capable PC are
connected through an Ethernet LAN segment. At the PC, launch
the browser application (Netscape Navigator
or Internet
Explorer).
2. At the PC browser, enter the LAN 2 IP address of the
management server, followed by :5800, as the Internet uniform
resource locator (URL). Enter the URL in the following format:
http://xxx.xxx.xxx.xxx:5800
Where xxx.xxx.xxx.xxx is the default IP address of 10.1.1.1 or the
IP address configured while performing Task 7: Configure
Management Server Password and Network Addresses on page 2-25.
The VNC Authentication screen displays (Figure 2-26).
Figure 2-26 VNC Authentication Screen