FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

2-62

McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual

Installation Tasks

4. Click Activate to enable changes and allow or prohibit FICON

host control.

SANtegrity™Binding

Features

SANtegrity Binding includes a set of features that enhance security in

SANs (Storage Area Networks) that contain a large and mixed group

of fabrics and attached devices. Through these features you can allow

or prohibit switch attachment to fabrics and device attachment to

switches. These features are enabled by purchasing a feature key,

then enabling the key through the Configure Feature Key dialog box.

For general instructions in enabling a feature key, refer to Task 16:

Configure PFE Key (Optional) on page 2-56.

SANtegrity Binding features include:

•Fabric Binding

•Switch Binding

Enterprise Fabric Mode - Although this is not a keyed feature, the

SANtegrity Fabric Binding and Switch Binding must be installed

before you can use Enterprise Fabric Mode function through the SAN

management application Fabrics menu.

Fabric Binding

This feature is managed through the Fabric Binding option, available

through the Fabrics menu in the SAN management application when

the Fabrics tab is selected. Using Fabric Binding, you can allow

specific switches to attach to specific fabrics in the SAN. This

provides security from accidental fabric merges and potential fabric

disruption when fabrics become segmented because they cannot

merge.

Japan 00281

Spain/Latin America 00284

United Kingdom 00285

France 00297

International #5 00500

Code Page Name Code Page