FW 07.00.00/HAFM SW 08.06.00 McDATA SANpilot User Manual (620-000160-230, April 2005)

MAP 0800: Server Hardware Problem Determination

3-111

Diagnostics

Figure 3-50 Shut Down Windows Dialog Box

b. Select the Shut Down option from the list box and click OK. The

EFC Server powers down.

c. Wait approximately 30 seconds and press the power button on

the LCD panel to power on the server and perform POSTs.

During POSTs:

1. The green LCD panel illuminates.

2. The green HDD LED blinks momentarily, and processor

speed and random-access memory information display

momentarily at the LCD panel.

3. After a few seconds, the LCD panel displays the following

message pertaining to boot sequence selection

(Figure 3-51):

Figure 3-51 LCD Panel During Boot Sequence

4. Ignore the message. After ten seconds, the server performs

the boot sequence from BIOS. During the boot sequence, the

server performs additional POSTs and displays the following

operational information at the LCD panel:

•Host name.

• System date and time.

• LAN 1 and LAN 2 IP addresses.

Boot from LAN?

Press <Enter>