FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Using the Fabrics View
126 High Availability Fabric Manager User Guide
SNMP Agent
Opens the Configure SNMP dialog box that allows you to configure the SNMP
agent that runs on the HAFM server and implements the Fibre Alliance MIB.
The HAFM server software contains a simple network management protocol
(SNMP) agent component. The HAFM SNMP agent instruments the objects
defined in the Fibre Channel Management (FCMGMT) Management Information
Base (MIB) Version 2.2 and a small number of objects defined in MIB II.
Through instrumentation of these MIB objects, the agent acts as a translator of
information stored on the HAFM server and attached directors into a form usable
by SNMP management stations such as HP OpenView. Refer to the HP
StorageWorks SNMP Reference Guide for Directors and Edge Switches.
You can configure network addresses and community names for up to twelve
SNMP trap recipients, which receive messages through SNMP for specific events
that occur on the HAFM server.
When configuring SNMP, you can configure just the community names of valid
SNMP management stations.
For details on using the Configure SNMP dialog box, refer to “SNMP Agent” on
page 78.
Activate Zone Set
Opens the Activate Zone Set dialog box that allows you to select and activate
configured zone sets. Only one zone set in the fabric can be active at one time.
Activating a zone set replaces the current active zone set with the one you
activate.
The dialog box displays all zone sets currently configured for the fabric. You can
click Next to display additional screens that help you through the activation
process or Previous to view previous screens. Refer to “Activate Zone Sets” on
page 162 for details on zoning and use of this dialog box.
Zoning Library
Opens the Zoning Library dialog box. Use this dialog box to perform the major
tasks for configuring zoning on the fabric:
■ Configure zone sets by combining zone members (attached nodes)
■ Configure zone sets by combining zones
■ Clear zones
■ Delete zones and zone sets