FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Using the Fabrics View
130 High Availability Fabric Manager User Guide
Using the Zone Set Tab
Click the Zone Set tab in the Fabrics View to open the Zone Set tab view. Select
a fabric in the Fabric Tree on the left side of the tab to display information on the
currently active zone set for the fabric in the right view area. Initially, a tree
structure of zones and zone members in the active zone set is completely
expanded in the display area. An expanded tree of zone members will also display
for the default zone if it is currently enabled.
Expand and compress the lists of zones and zone sets in the display area by
clicking the icons to the left of the zone and zone set names. You can display all
zone members for each zone, only zone members logged in, or only zone
members not logged in using the drop-down list above the display area.
View Area Features
This section describes the buttons, drop-down lists, and messages that display in
the view area.
■ Click the Save Active Zone Set As button to display the Save Active Zone
Set As dialog box. Enter a name for the zone set and click OK to save the
active zone set under a different name in the zone set library.
■ Click Refresh to refresh the display area with current zone set data.
■ Right-click in the view area to display the Display Options menu. Choose
Nickname to display zone members by nickname (if configured). Choose
World Wide Name to display members by their 16-digit WWN.
■ The information area at the bottom of the tab will display one of three
messages:
— The Default Zone is ENABLED. If the default zone is enabled,
members in the default zone appear in the tree structure of zones and
members in the display area.
— The Default Zone is DISABLED. If disabled, members of the
default zone will not appear in the tree structure in the display area.
— The active zone set does not currently match any
of the stored zone sets. This displays if the active zone set
does not match any zone sets in the zoning library.