FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Fabric Zoning
154 High Availability Fabric Manager User Guide
7. To accept the zone set, click OK. The New Zone Set dialog box closes and
the new zone set displays in the Zone Set tab of the Zoning Library dialog
box.
Modify Zones and Zone Sets
Use the following procedures to modify existing zones and zone sets using the
Open option in the File menu.
Zones
1. Choose the Zones tab in the Zoning Library dialog box.
2. Click a zone in the library to select it.
3. Click File > Modify or right-click the zone and choose Modify from the
pop-up menu.
The Modify Zone dialog box displays.
4. Use steps, starting with step 5 in the “Configure Zones and Zone Sets” section
on page 148, to add zone members, remove zone members, or clear zones.
Note that the zone name cannot be changed in this dialog box. Choose the
zone in the Zoning Library dialog box, then choose Rename from the File
menu to do this.
Zone Sets
1. Choose the Zone Sets tab in the Zoning Library dialog box.
2. Click a zone set to select it in the library.
3. Click File > Modify.
The Modify Zone Set dialog box displays.
4. Use steps, starting with Step 5 in the “Configure Zones and Zone Sets”
section on page 148, to view zone members or add or remove zones from
zone sets. Note that the zone set name cannot be changed in this dialog box.
Choose the zone set in the Zoning Library dialog box, then choose File >
Rename.