FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Information and Error Messages
201High Availability Fabric Manager User Guide
Click OK to remove all
contents from log.
This action deletes all
contents from the selected
log.
Click OK to delete the log
contents or Cancel to
cancel the operation.
Connection to HAFM
server lost. Click OK to
exit application.
The
HAFM application at
a remote workstation lost
the network connection to
the HAFM server.
Re-start the HAFM
application to connect to
the HAFM server.
Connection to HAFM
server lost.
The connection to the
remote HAFM server has
been lost.
Log in to the HAFM server
again through the HAFM
Login
dialog box.
Could not export log to
file.
A log file input/output
(I/O) error occurred and
the file could not be saved
to the specified
destination. The disk may
be full or write protected.
If the disk is full, use
another disk. If the disk is
write protected, change
the write-protect
properties or use another
disk.
Default zoning is not
supported in Open Fabric
Mode.
A default zone cannot be
enabled when the product
is enabled for Open
Fabric mode. Open
Fabric mode does not
support zone members
defined by port numbers.
Change the interop mode
from Open Fabric mode
to Homogeneous Fabric
mode through the
Configure Operating
Mode dialog box in the
Product Manager
application. Or, redefine
zone members by the
WWN of attached
devices.
Device is not a member of
a zone in the active zone
set.
The selected device is not
a member of a zone in
the active zone set and
therefore cannot
communicate with the
other device in the route.
Enable the default zone
or activate a zone set
containing the member
before attempting to show
the route.
Download complete. Click
OK and restart the
HAFM.
Download of the
HAFM
and
Product Manager
applications is complete.
Restart the
HAFM
application to continue.
Duplicate community
names require identical
write authorizations.
If configuring two
communities with
identical names, they
must also have identical
write authorizations.
Verify that both
communities with the
same name have the
same write authorizations.
Table 9: High Availability Fabric Manager Messages (Continued)
Message Description Action