FW V05.01.00-24/HAFM SW V07.01.00-09 HAFM 1U Server SW V07.02.00-09 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CD-TE, September 2003)

Using the Menu Bar
80 High Availability Fabric Manager User Guide
5. If you want the trap recipient to be an active recipient, click the check box in
the Active column to add a check mark. If you want to configure the recipient
and then activate the recipient at a later time, leave the check box empty.
6. To override the default User Datagram Protocol (UDP) port number for a trap
recipient with any legal, decimal UDP number, enter the UDP port number in
the UDP Port Number column.
7. To enable or disable the SNMP agent to capture events, select the Enable
SNMP Agent on server check box.
8. To enable or disable authorization traps to be sent when unauthorized
management stations try to access SNMP information through the HAFM
server, select the Enable Authorization Traps check box.
9. Click OK to accept and activate the data.
Activate Zone Set
Opens the Activate Zone Set dialog box that allows you to select and activate
configured zone sets. Only one zone set in the fabric can be active at one time.
Activating a zone set replaces the current active zone set with the one you
activate.
The dialog box displays all zone sets currently configured for the fabric. You can
click Next to display additional screens that help you through the activation
process or Previous to view previous screens. Refer to “Activate Zone Sets” on
page 162 for details on zoning and use of this dialog box.
Zoning Library
Opens the Zoning Library dialog box. Use this dialog box to perform the major
tasks for configuring zoning on the fabric:
■ Configure zone sets by combining zone members (attached nodes)
■ Configure zone sets by combining zones
■ Clear zones
■ Delete zones and zone sets
■ Import and export zone sets
■ Display zone and zone set properties
■ Copy zones and zone sets
■ Find zone members in zones