FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

HA-Fabric Manager user guide 115
The New Plan dialog box appears (Figure 72).
Figure 72 New Plan dialog box
2. Enter a name in the New Plan box.
3. Select one of the following options:
• Start with discovered topology to use the discovered topology as the basis for the new
plan
• Start Empty to start the new plan with an empty topology
4. Click OK.
Opening a plan
1. Select SAN > Open Plan from the Planning window menu bar (or press Ctrl+O).
The Open Plan dialog box appears (Figure 73).
Figure 73 Open Plan dialog box
2. Select a plan from the Open Plan list.
3. Click OK.
Adding devices
You can add one device or multiple devices to the plan.
• To add one device:
a. Click a device icon on the devices toolbox.
b. Click the Physical Map in the Planning window.
The new planned device icon appears on the Physical Map.
• To add multiple devices:
a. Click the devices icon on the devices toolbox.