FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

Zoning132
The Deactivate Zone Set dialog box appears (Figure 82).
Figure 82 Deactivate Zone Set dialog box
The dialog box shows the names of the active zone set, and shows the new active zone set as
none. Verify the information in this dialog box.
3. Click OK.
The active zone set and its zones are deactivated.
NOTE: If the default zone is enabled and the active zone set is deactivated, members of the zone
may still be able to communicate.
Enabling and disabling the default zone
By enabling the default zone the potential zone members that are not in zones can see all other
potential members that are not in zones.
To enable the default zone:
1. Display the zone library. (See “Displaying the zone library” on page 177).
The Zoning dialog box appears (Figure 78).
2. Select the fabric for which you want to enable the default zone.
3. Enable the default zone by selecting the Default Zone button.
4. Click OK.