FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

Zoning138
The List Zone Members dialog box appears (Figure 86).
Figure 86 List Zone Members dialog box
4. Click Close to close the dialog box.
Saving the active zone set to a zoning library
When you manage a switch’s zone set through one appliance, and then import that switch into a
new appliance, you must save the zone set on the new appliance, This allows pre-existing zoning
information on the switch to be stored on the new appliance.
1. Select Configure > Zoning from the HAFM menu bar.
The Zoning dialog box appears (Figure 78 on page 127).
2. Select a fabric from the Fabric list.
3. Click the Active Zone Set tab.
4. Select the active zone set and click Save As.
The Save Active Zone Set As dialog box appears.
5. Rename the active zone set and click OK.
The switch’s zoning information is imported to the new appliance. You can now manage zones
and zone sets through the new appliance.
Comparing zone sets
To compare two zone sets:
1. Select Configure > Zoning from the HAFM menu bar.
The Zoning dialog box appears (Figure 78 on page 127.)
2. Select a fabric from the Fabric list.
3. Click the Activate Zone Set tab.
4. Click Compare With.