FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

Informational and error messages186
Cannot display route. All
switches in route must
support routing.
You cannot show the
route through a fabric
that has switches or
directors which do not
support routing.
The route must contain only Edge
Switch 2/16s, Edge Switch
2/32s, Director 2/64s, or Director
2/140s.
Cannot display route.
Device is not a member
of a zone in the active
zone set.
You cannot show the
route for a device that is
not a member of a zone
in the active zone set. The
source node that you
have selected is not part
of a zone in the active
zone set.
Enable the default zone or activate
the zone for the device before
attempting to show the route.
Cannot display route on
one switch fabric.
You cannot show routes
between end devices in a
fabric when configuring
Show Routes (Configure
menu).
Error displays when attempting to
show routes on a fabric with only
one switch. Configure Show
Routes on a multi-switch fabric.
Cannot display route.
error 9.
An internal error has
occurred while trying to
view routes.
Contact the next level of support to
report the problem.
Cannot display route. No
active zone enabled.
You cannot show the
route through a fabric
with no active zone.
Enable the default zone or activate
a zone set before attempting to
show the route.
Cannot have spaces in
field.
Spaces are not allowed
as part of the entry for
this field.
Delete spaces from the field entry.
Cannot modify a zone set
with an invalid name.
Rename zone set and try
again.
A zone set must have a
valid name to be
modified.
Assign a valid name to the zone
set, then modify the name through
the Modify Zone Set dialog box.
Cannot modify a zone
with an invalid name.
Rename zone and try
again.
A zone must have a valid
name to be modified.
Assign a valid name to the zone,
then modify the name through the
Modify Zone Set dialog box.
Table 23 HAFM Messages (continued)
Message Description Action