FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

Informational and error messages188
Connection to
management server lost.
The connection to the
remote HAFM appliance
has been lost.
Log in to the HAFM appliance
again through the HAFM Log In
dialog box.
Connection to
management server lost.
Click OK to exit
application.
The HAFM application at
a remote workstation lost
the network connection to
the HAFM appliance.
Re-start the HAFM application to
connect to the HAFM appliance.
Could not export log to
file.
A log file input/output
(I/O) error occurred and
the file could not be
saved to the specified
destination. The disk may
be full or write protected.
If the disk is full, use another disk.
If the disk is write protected,
change the write-protect properties
or use another disk.
Default zoning is not
supported in Open Fabric
Mode.
A default zone cannot be
enabled when the
product is enabled for
Open Fabric mode.
Open Fabric mode does
not support zone
members defined by port
numbers.
Change the Interop Mode from
Open Fabric to Homogeneous
using the Configure Fabric
Parameters dialog box. You can
also redefine zone members by the
device WWN.
Device is not a member
of a zone in the active
zone set.
The selected device is not
a member of a zone in
the active zone set and
therefore cannot
communicate with the
other devices in the route.
Enable the default zone or activate
a zone set containing the member
before attempting to show the
route.
Download complete.
Click OK and start the
HAFM.
Download of HAFM and
the Element Manager is
complete.
Start the HAFM application to
continue.
Duplicate community
names require identical
write authorizations.
If configuring two
communities with
identical names, they
must also have identical
write authorizations.
Verify that both communities with
the same name have the same
write authorizations.
Duplicate Fabric Name. The specified fabric name
already exists.
Choose another name for the
fabric.
Duplicate name in zoning
configuration. All zone
and zone set names must
be unique.
Every name in the zoning
library must be unique.
Modify (to make it unique) or
delete the duplicate name.
Table 23 HAFM Messages (continued)
Message Description Action