FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

Informational and error messages194
No nickname selected. No nickname was
selected when the
command was attempted.
Choose a nickname and try again.
No Element Managers
installed.
No director or switch
Element Manager is
installed on this
workstation.
Install the appropriate Element
Manager to this workstation.
No routing information
available.
No information is
available for the route
selected.
Choose a different route and try
the operation again.
No user selected. A user was not selected
when the command was
attempted.
Choose a user and try again.
No zone member
selected.
A zoning operation was
attempted without a zone
member selected.
Choose a zone member and try
the operation again.
No zone selected. A zoning operation was
attempted without a zone
selected.
Choose a zone and try the
operation again.
No zone selected or
zone no longer exists.
A zoning operation was
attempted without a zone
selected, or the zone
selected no longer exists
in the fabric.
Choose a zone and try the
operation again.
No zone set active. A zone set cannot be
deactivated if there are
no active zones.
Informational message only—no
action is required.
No zone set selected. A zoning operation was
attempted without a zone
set selected.
Choose a zone set and try the
operation again.
No zone set selected or
zone set no longer exists.
A zoning operation was
attempted without a zone
set selected, or the zone
set you selected no
longer exists in the fabric.
Choose a zone set and try the
operation again.
Only attached nodes can
be displayed in this
mode.
You cannot display
unused ports when
adding ports by World
Wide Name.
Change the add criteria to Add by
Port.
Table 23 HAFM Messages (continued)
Message Description Action