FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

HA-Fabric Manager user guide 211
Domain IDs must be in
the range of 1 to 31.
Domain IDs entered in the
Configure Preferred Paths
dialog box must fall in a
specific range.
In the Configure Preferred Paths
dialog box, change the number in
the Destination Domain ID field to
a number between 1 and 31,
inclusive.
Duplicate Community
names require identical
write authorizations.
Duplicate community
names are entered at the
Configure SNMP dialog
box, and have different
write authorizations.
Delete the duplicate community
name or make the write
authorizations consistent.
Element Manager error
<number>.
The Element Manager
encountered an internal
error and cannot
continue.
Contact the next level of support to
report the problem.
Element Manager
instance is currently
open.
A Element Manager
window is currently open.
Informational message only.
Enterprise Fabric Mode
will be disabled if any of
the following parameters
are disabled: Insistent
Domain ID, Rerouting
Delay, Domain RSCNs.
Do you want to continue?
You attempted to disable
these parameters in the
Configure Switch
Parameters dialog box
while the switch was
online, but Enterprise
Fabric Mode (SANtegrity
Binding feature) is
enabled.
Click Yes if you want to continue,
and disable Enterprise Fabric
Mode.
Error retrieving port
information.
An error occurred at the
Element Manager while
retrieving port
information because the
Ethernet link is down or
busy.
Retry the operation later. If the
condition persists, contact the next
level of support.
Error retrieving port
statistics.
An error occurred at the
Element Manager while
retrieving port statistics
because the Ethernet link
is down or busy.
Retry the operation later. If the
condition persists, contact the next
level of support.
Error stopping port
diagnostics.
An error occurred at the
Element Manager while
attempting to stop port
diagnostics from running
because the Ethernet link
is down or busy.
Retry the operation later. If the
condition persists, contact the next
level of support.
Table 24 Element Manager Messages (continued)
Message Description Action