FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

Using the HAFM application30
Anchoring or floating the Minimap
You can anchor or float the Minimap to customize your main window.
Floating the Minimap
To float the Minimap and view it in a separate window, click the Detach button in the upper
right-hand corner of the Minimap.
Anchoring the Minimap
To return the Minimap to its original location on the main window, do one of the following:
• Click Attach in the upper right-hand corner of the Minimap.
• Click Close in the upper right-hand corner of the Minimap.
• Click the logo in the upper left-hand corner of the Minimap and select Close (ALT + F4).
Resizing the Minimap
On an anchored Minimap, place the cursor on the left border of the Minimap until a
double-pointed arrow displays. Click and drag the adjoining divider.
On a floating Minimap, place the cursor on a border of the Minimap until a double-pointed arrow
displays. Click and drag to change the window size.
Status bar
The status bar, (Figure 4 9) provides status information about the SAN and the application. Place
your cursor on a status bar icon to for information about the status displayed. The icons are:
• Server Status—Displays local appliance status.
• Connection Status—Displays the appliance-Client connection status.
• Product Status—Displays the most degraded status of all devices in the SAN. For example, if all
devices are operational except one (which is degraded), the Product Status will display as
degraded. Click this button to open the Product State Log. Refer to ”Determining the discovery
state” on page 66 for more information.
• Fabric Status—Displays the state of the fabric that is least operational, based on ISL status. The
possible states are:
•operational
• unknown
•degraded
•failed.
Select a product or fabric from the Physical Map or Product List and click this button to open the
related Fabric Log (only available for persisted fabrics). Refer to ”Monitoring events” on
page 89 for more information.
• Attention Indicator—This icon displays when at least one HP product in the SAN has an
attention indicator. Click the icon to open the Service Request dialog box, which lists all HP
switches and directors that need attention.
• Call Home Status—Displays if the Call Home service has been enabled. If Call Home has been
enabled on all managed HP switches and on the management application, the icon will appear